ASPHALT & BITUMEN TESTING EQUIPMENT

AUTOSAW2 Automated Asphalt Saw Kuwait

AUTOSAW2 Automated Asphalt Saw Kuwait is Burgan Equipment Co.’s second-generation, fully automated saw for preparing precise asphalt test specimens. Built by IPC Global, part of Controls Group, it cuts rectangular beams, trapezoidal prisms, overlay test specimens and semi-circular specimens, and trims cylindrical cores, with length, perpendicularity and flatness accurate to within ±1%. A protective cabinet with interlocked doors, a stainless steel water tray and an intuitive touchscreen make it safe, clean and easy to use, while automated cutting frees technicians for other work. Burgan supplies, installs and supports the AUTOSAW2 for asphalt laboratories across Kuwait.

Highlights & Features
Specifications & Models
Accessories & Standards

Key system highlights

  • AUTOSAW2 Automated Asphalt Saw Kuwait: fully automated, accurate cutting of asphalt test specimens.
  • Versatile cutting: beams, trapezoidal prisms, overlay, semi-circular bend specimens and core trimming.
  • High accuracy: length, perpendicularity and flatness within ±1%, according to standards.
  • Automated operation: load the sample, set the cut, and the saw completes the work.
  • Intelligent touchscreen: set carriage speed and retraction sequence quickly.
  • Repeatable cuts: adjustable limit switches minimise carriage overtravel.
  • Exact dimensions: fixed positions, reference blocks and an integrated ruler for common international standards.
  • Pneumatic clamping: secure, consistent specimen holding.
  • Safe operation: protection cabinet with automatically locking doors, plus a blade brake when doors open.
  • Clean laboratory: stainless steel water tray and recirculating cooling system.
  • Dynamic braking: rapid blade stop when switched off.
  • Compressed air gun: for cleaning specimens and the saw.
  • Upgradeable: add jigs to meet future testing standards.

Technical Specifications

  • Model Range: AUTOSAW2 Automated Asphalt Saw Kuwait models are available in 50 Hz and 60 Hz versions.
  • Blade Diameter: 650 mm.
  • Max Cutting Depth: 200 mm.
  • Cores: 100, 150 or 200 mm diameter.
  • Prism Length: Max 500 mm.
  • Accuracy: Length, perpendicularity and flatness ±1% max., according to standards.
  • Blade Speed: 1,400–1,680 rpm (50/60 Hz).
  • Blade Traverse: 0–200 mm/min, variable.
  • Blade Retraction Traverse: 0–999 mm/min, variable.
  • Cutting Advancement: Automatic speed control with variable stop and retract sensors.
  • Air Supply for Clamping: 700 kPa minimum.
  • Cooling: Water recirculation pump and stainless steel tank, included.
  • Power: 5 kW.
  • Voltage: 400 V, 50 Hz, 3-phase or 220 V, 60 Hz, 3-phase.
  • Dimensions (L x W x H): 2,000 x 800 x 1,700 mm.
  • Weight: Approx. 650 kg.
  • Extended Range: Models for cores of 38–200 mm and prisms up to 700 mm, available on request.
  • Note: For asphalt specimens only. Not suitable for cutting concrete or rock.

Models

  • 77-PV47105: AUTOSAW II with asphalt multi-slab jig and protection cabinet, 400 V, 50–60 Hz, 3-phase + N (blade not included)
  • 77-PV47106: AUTOSAW II with asphalt multi-slab jig and protection cabinet, 220 V, 60 Hz, 3-phase (blade not included)

Accessories

  • 77-PV47000/1 Diamond blade: 650 mm diameter, for asphalt.
  • 77-PV47000/2 Sacrificial PVC tube: for 100 mm cores.
  • 77-PV47011 Universal core jig: automatic single or double parallel cuts on 100 or 150 mm cores.
  • 77-PV47014 Round core jig: manual cutting of cores from 38 to 200 mm diameter.
  • 77-PV47020 Trapezoidal jig: for two-point bending specimens to EN 12697-24A and 26A.
  • 77-PV47025 Wheel tracking / SCB jig: for wheel tracking cores, Semi-Circular Bend and Disk-Shaped Compact Tension specimens.
  • 77-PV47030 Overlay jig: for overlay test specimens to TEX-248-F.

Standards

  • AASHTO PP99: preparation of asphalt specimens for performance testing
  • AASHTO R83: preparation of cylindrical performance test specimens
  • EN 12697-24 / 26: specimen preparation for fatigue and stiffness testing (with the trapezoidal jig)
  • TEX-248-F: overlay test specimens (with the overlay jig)
  • Confirm the exact method your client or ministry specification requires before ordering.

Frequently Asked Questions

It cuts rectangular beams, trapezoidal prisms, overlay test specimens and semi-circular bend specimens, and trims cylindrical cores to length, using the matching jig for each.

No. The AUTOSAW2 is designed for asphalt specimens only. Concrete and rock require a different cutting machine.

No. The 650 mm diamond blade for asphalt is ordered separately as accessory 77-PV47000/1.

Yes. Burgan Equipment Co. installs, commissions and services every AUTOSAW2 Automated Asphalt Saw Kuwait laboratories order, with operator training and genuine spare parts.

Related Products

AMPT PRO Asphalt Mixture Performance Tester


Dynamic modulus, flow number and flow time testing to AASHTO T378. Predicts asphalt mix stiffness and rutting resistance.

BITUMAX Pro Asphalt Binder Analyzer


Solvent-free ignition oven for binder content testing. Fully automatic results in under 40 minutes with clean afterburner exhaust.

DWT Universal Double Wheel Tracker


Rutting and moisture damage testing to AASHTO T324 and EN 12697-22. Steel and rubber wheels, testing in air or water.

Explore Our Complete Asphalt Testing Range

From binder analysis and specimen compaction to performance and rutting tests, Burgan Equipment Co. supplies a complete range of asphalt testing equipment in Kuwait. Every system is backed by installation, calibration, operator training and local after-sales support, so your laboratory has one trusted partner for every stage of asphalt testing.