ASPHALT & BITUMEN TESTING EQUIPMENT

GYROCOMP EmS Gyratory Compactor Kuwait

GYROCOMP EmS Gyratory Compactor Kuwait is Burgan Equipment Co.’s fully electromechanical compactor for preparing asphalt specimens that reproduce real road compaction conditions. Built by IPC Global, part of Controls Group, it is approved as a Superpave™ gyratory compactor and certified to AASHTO and EN standards. It runs on a standard single-phase supply with no external air compressor, making it simple to install and low on maintenance — ideal for quality control laboratories and mobile labs alike. Burgan supplies, installs and calibrates the GYROCOMP EmS for asphalt laboratories across Kuwait.

Highlights & Features
Specifications & Models
Accessories & Standards

Key system highlights

  • GYROCOMP EmS Gyratory Compactor Kuwait: 100% electromechanical gyratory compaction for asphalt mix design and quality control.
  • Fully standalone: needs only a single-phase power supply, with no external air compressor.
  • Low maintenance: the electromechanical actuator removes hydraulics and compressed air.
  • Superpave™ approved: certified to AASHTO and EN standards.
  • Two specimen sizes: compacts 150 mm and 100 mm diameter specimens.
  • 7-inch colour touchscreen: create, save and recall test procedures for fast operation.
  • Flexible test control: run by number of gyrations or by target specimen height.
  • High productivity: designed for continuous, heavy daily use.
  • Compact and lightweight: suits fixed laboratories and mobile labs.
  • Safe, ergonomic design: sliding transparent door and full safety protection.
  • Integrated extruder option: motorised specimen extruder on a matching worktop.
  • PC connectivity: Ethernet for PC control and USB for data storage.
  • One-year full warranty.

Technical Specifications

  • Function: Gyratory compaction of asphalt mixture specimens.
  • Specimen Diameter: 150 mm and 100 mm.
  • Specimen Height: 80 to 200 mm (150 mm dia.); 50 to 200 mm (100 mm dia.).
  • Consolidation Pressure: 80 to 900 kPa (150 mm); 160 to 1,500 kPa (100 mm).
  • Internal Angle of Gyration: Adjustable 0.70° to 1.40°, preset to 1.16° on standard models.
  • Speed of Gyration: Adjustable from 20 to 60 rpm.
  • Number of Gyrations: Adjustable up to 9,999.
  • Test Control: By number of gyrations or specimen height.
  • Display: 7-inch colour touchscreen.
  • Connections: Ethernet (PC), USB (data storage).
  • Power Rating: 1,000 W, single phase.
  • Dimensions (W x D x H): 469 x 615 x 1,130 mm; 502 x 753 x 1,940 mm with extruder bench.
  • Weight: Approx. 100 kg; 150 kg with extruder.

Models

  • 78-PV2532: GYROCOMP EmS, 1.16° internal angle to AASHTO T312 and ASTM D6925, 230 V, 50–60 Hz, single phase
  • 78-PV2534: GYROCOMP EmS, 1.16° internal angle to AASHTO T312 and ASTM D6925, 110 V, 60 Hz, single phase

Accessories

  • 78-PV0250/2 and 78-PV0250/5 Cylinder moulds: hardened moulds, 150 mm and 100 mm diameter, with top and bottom plates.
  • 78-PV0250/10 and 78-PV0250/8 Cold mix moulds: 150 mm and 100 mm moulds with holes for cold mix compaction.
  • 78-PV0250/3, /6 and /15 Distance pieces: for compacting lower-height specimens.
  • 78-PV0250/4 100 mm adapter kit: for compacting 100 mm specimens (mould not included).
  • 78-PV0250/13 and /14 Wearing discs: stainless steel spares for 150 mm and 100 mm moulds.
  • 78-PV0250/16 and /17 Paper discs: packs of 1,000, 150 mm and 100 mm.
  • 78-PV20/SOF PC software: remote control, mix design and multiple-mix comparison.
  • 78-PV2520/15 Integrated worktop with extruder: motorised specimen extruder, 230 V (110 V version also available).
  • 78-PV20UP4 EN calibration: traceable ACCREDIA certificate to EN 12697-31 Annex B.
  • 78-PV0255/1 Angle calibrator blocks: set of two angles, with factory certificate.
  • 78-PV0250/11 Vertical force indicator: 25 kN load cell with readout and calibration certificate.

Standards

  • AASHTO T312: preparing asphalt specimens with the Superpave gyratory compactor
  • ASTM D6925: gyratory compaction of asphalt mixtures
  • EN 12697-10: compactibility of bituminous mixtures
  • EN 12697-31: specimen preparation by gyratory compactor
  • SHRP M002

Frequently Asked Questions

A gyratory compactor prepares asphalt specimens by applying pressure while the mould gyrates at a set angle, reproducing how rollers compact asphalt on the road. The specimens are then used for Superpave mix design, volumetric analysis and performance testing.

The GYROCOMP EmS needs no hydraulics or external air compressor, only a single-phase power supply. This means simpler installation, less maintenance and easy use in mobile laboratories.

Yes. Burgan Equipment Co. installs, calibrates and services every GYROCOMP EmS Gyratory Compactor Kuwait laboratories order, including angle and force verification and operator training.

It compacts 150 mm diameter specimens as standard and 100 mm specimens with the adapter kit, at heights from 50 to 200 mm.

Related Products

AMPT PRO Asphalt Mixture Performance Tester


Dynamic modulus, flow number and flow time testing to AASHTO T378. Predicts asphalt mix stiffness and rutting resistance.

BITUMAX Pro Asphalt Binder Analyzer


Solvent-free ignition oven for binder content testing. Fully automatic results in under 40 minutes with clean afterburner exhaust.

DWT Universal Double Wheel Tracker


Rutting and moisture damage testing to AASHTO T324 and EN 12697-22. Steel and rubber wheels, testing in air or water.

Explore Our Complete Asphalt Testing Range

From binder analysis and specimen compaction to performance and rutting tests, Burgan Equipment Co. supplies a complete range of asphalt testing equipment in Kuwait. Every system is backed by installation, calibration, operator training and local after-sales support, so your laboratory has one trusted partner for every stage of asphalt testing.