ASPHALT & BITUMEN TESTING EQUIPMENT

Balanced Loader Universal Tester Kuwait

Balanced Loader Universal Tester Kuwait is Burgan Equipment Co.’s 50 kN automatic electromechanical load frame for Balanced Mix Design and everyday asphalt testing. Built by IPC Global, part of Controls Group, it automatically performs IDEAL-CT, IDEAL-RT, Indirect Tensile Strength, Semi-Circular Bend, Marshall stability and many more tests on a single compact machine. Closed-loop speed and load control, automatic failure detection and a 7-inch touchscreen make testing fast, accurate and repeatable. Burgan supplies, installs and calibrates the BALANCED LOADER for asphalt and road laboratories across Kuwait.

Highlights & Features
Specifications & Models
Accessories & Standards

Key system highlights

  • Balanced Loader Universal Tester Kuwait: one automatic machine for Balanced Mix Design and a wide range of asphalt and soil tests.
  • Balanced Mix Design ready: runs IDEAL-CT, IDEAL-RT, Semi-Circular Bend (I-FIT) and indirect tensile tests.
  • 50 kN capacity: brushless-motor drive in a compact, ergonomic cabinet.
  • Closed-loop control: reliable testing under either displacement or load control.
  • Automatic failure detection: stops the test at specimen failure, or use a set travel or time limit instead.
  • No external displacement transducer needed: ram displacement is measured internally.
  • Wide two-column frame: adjustable crossbeam height to suit different test accessories.
  • Variable speed: from 0.01 to 65 mm/min, with load rate from 1 to 9,999 N/s.
  • 7-inch colour touchscreen: real-time test graph, live transducer data and saved test procedures.
  • Large data storage: 16 GB internal memory, with USB, Ethernet and RS232 download.
  • Integrated transducer calibration facility.
  • Adjustable travel limit switches and a CE emergency stop button.
  • Optional PC software for remote control.

Technical Specifications

  • Model Range: Balanced Loader Universal Tester Kuwait models are available in 230 V and 110 V single-phase versions.
  • Capacity: 50 kN.
  • Type of Control: Displacement or load, closed loop.
  • Test Speed: 0.01 to 65 mm/min.
  • Load Rate: 1 to 9,999 N/s.
  • Max Ram Travel: 100 mm.
  • Max Vertical Span: 800 mm.
  • Max Horizontal Span: 380 mm.
  • Channels: 7 (1 actuator displacement, 2 load, 4 displacement).
  • Channel Resolution: 24 bit.
  • Sampling Frequency: Up to 100 Hz.
  • Memory: 16 GB internal.
  • Data Download: Ethernet, RS232 or USB.
  • Display: 7-inch capacitive colour touchscreen.
  • Power: 400 W.
  • Dimensions (W x D x H): 545 x 670 x 1,300 mm.
  • Weight: Approx. 110 kg.

Models

  • 76-PV1282: BALANCED LOADER 50 kN with digital control, motorised ram, two-column frame and adjustable crossbeam, 230 V, 50–60 Hz, single phase
  • 76-PV1284: BALANCED LOADER 50 kN with digital control, motorised ram, two-column frame and adjustable crossbeam, 110 V, 60 Hz, single phase

 

Tests it can perform

  • Marshall stability: ASTM D6925, AASHTO T245, EN 12697-34
  • Indirect tensile strength / TSR: ASTM D6931, AASHTO T283, EN 12697-23
  • Semi-Circular Bend (I-FIT): AASHTO T393 / TP124
  • Semi-Circular Bend (Louisiana): ASTM D8044, EN 12697-44
  • IDEAL-CT cracking test: ASTM D8225
  • IDEAL-RT rutting test: ASTM D8360
  • Interlayer shear strength: AASHTO TP114
  • Leutner shear test: EN 12697-48
  • CBR / LBR: ASTM D1883, AASHTO T193, EN 13286-47
  • Unconfined compression: EN ISO 17892-7

Accessories

  • Test jigs and accessory sets: ordered separately for each test (Marshall, ITS, SCB, IDEAL-CT, shear and CBR) to configure the Balanced Loader Universal Tester Kuwait for your laboratory’s scope.
  • Load cells and displacement transducers: supplied with traceable calibration certificates.
  • ACCREDIA calibration certificates: available on request.
  • PC software: optional, for remote control and data analysis.

Standards

  • AASHTO: T193, T245, T283, T393, TP124
  • ASTM: D1883, D6925, D6931, D8044, D8225, D8360
  • EN: 12697-23, 12697-44, 12697-48, 13286-47
  • Confirm the exact method your client or ministry specification requires before ordering.

Frequently Asked Questions

Balanced Mix Design (BMD) is an approach that checks an asphalt mix against both cracking and rutting performance tests, rather than relying on volumetric properties alone. Tests such as IDEAL-CT and IDEAL-RT help engineers find a mix that resists both types of failure.

It runs Marshall stability, indirect tensile strength and TSR, Semi-Circular Bend, IDEAL-CT, IDEAL-RT, interlayer shear, CBR and unconfined compression tests, using the matching accessory set for each.

No. Test jigs and accessories are ordered separately, so you only buy what your laboratory needs. Our team can recommend the right set for your testing scope.

Yes. Burgan Equipment Co. installs, calibrates and services every Balanced Loader Universal Tester Kuwait laboratories order, including traceable calibration of load cells and transducers and operator training

Related Products

AMPT PRO Asphalt Mixture Performance Tester


Dynamic modulus, flow number and flow time testing to AASHTO T378. Predicts asphalt mix stiffness and rutting resistance.

BITUMAX Pro Asphalt Binder Analyzer


Solvent-free ignition oven for binder content testing. Fully automatic results in under 40 minutes with clean afterburner exhaust.

DWT Universal Double Wheel Tracker


Rutting and moisture damage testing to AASHTO T324 and EN 12697-22. Steel and rubber wheels, testing in air or water.

Explore Our Complete Asphalt Testing Range

From binder analysis and specimen compaction to performance and rutting tests, Burgan Equipment Co. supplies a complete range of asphalt testing equipment in Kuwait. Every system is backed by installation, calibration, operator training and local after-sales support, so your laboratory has one trusted partner for every stage of asphalt testing.